Complex System

Step three: The computer will take a moment now to scan itself for any Windows installations, after which you will likely be given a choice to select which installation you wish to repair.  Select the appropriate Windows installation from the list and then continue. If by chance a problem is detected in one of your Windows installations at this initial stage, the system may also ask you if it can try to repair the problem automatically. It is up to you if you wish to let the system try to repair itself, but otherwise just select No. 

Step five: Now sitting at the command prompt, enter the following command and then press enter:

         bootrec.exe /FixMbrIf successful, you should be greeted with the message The operation completed successfully.  That's it!  Your Master Boot Record has been repaired.

While the above command does fix the MBR, and sometimes that is enough, there still might be an error with the system partition's boot sector and Boot Configuration Data (BCD). This might occur if you have tried to install another operating system alongside Windows 7, such as Windows XP.  To write a new boot sector, try the following command:

        bootrec.exe /FixBoot If you are still faced with your Windows 7 installation not being detected during start up, or if you wish to include more than one operating system choice to your system's boot list, you can try the following command to rebuild your BCD:
       
        bootrec.exe /RebuildBcd

The above command will scan all your disks for other operating systems compatible with Windows 7 and allow you to add them to your system's boot list. If this fails, you may need to backup the old BCD folder* and create a new one in its place with the following commands:

        bcdedit /export C:\BCD_Backup

        c:

        cd boot

        attrib bcd -s -h -r

        ren c:\boot\bcd bcd.old